Metallic Epoxy Flooring In Clyde North

Metallic Epoxy Flooring Experts

Owner-operated epoxy floor specialists based in Clyde North, delivering seamless, hard-wearing coatings across Melbourne's South East.

GET A FREE QUOTE

Full Name *

Phone *

Short message about your needs *

I agree to terms & conditions provided by the company. By providing my phone number, I agree to receive text messages from the business.

0485 037 710

Armourstone Coatings

What Metallic Epoxy Flooring Actually Is - And the Effects You Can Choose

Metallic epoxy is a decorative resin system where fine metallic pigment is suspended in a clear epoxy base, then manipulated while wet to create three-dimensional colour that shifts as you move around the room. The effect is built by the installer, not printed, so you can steer it toward a soft marble look, a dramatic lava or molten-metal flow, a deep ocean or river ripple, or a subtle single-tone pearl. A single pigment gives a calm, uniform shimmer, while blending two or three pigments creates the high-contrast veining and craters people associate with premium metallic floors. Because the pattern is drawn out by hand with rollers, spikes and controlled solvent, every floor is genuinely one-of-a-kind and cannot be repeated exactly. Colours range from warm coppers, golds and bronzes through to charcoals, silvers, blues and greens, and can be tuned to match a brand or interior scheme. The whole system is finished clear on top, so what you see is real depth in the coating rather than a surface print that can wear away.

Armourstone Coatings

The Prep-First Method Behind a Flawless Metallic Floor

A metallic floor shows every shortcut, so preparation matters even more than it does on a plain coating. Armourstone starts by diamond grinding the concrete to open the surface and create the correct surface profile (CSP), which is what lets the primer bite in and stops the system peeling later. Daler checks the slab for moisture using RH testing where needed, because trapped vapour is the most common cause of blistering under decorative coatings. Any cracks, spalling or pin-holes are cut out and repaired, then a primer and a pigmented base coat go down to seal the slab and set the background tone. The metallic layer is poured next and worked wet - pigments are floated, feathered and marbled by hand to build the effect, which is where the artistry and the labour sit. Once cured, the floor is sealed with a UV-stable clear top-coat, either polyaspartic or polyurethane, applied to a proper mil build so the finish resists abrasion, yellowing and everyday chemical spills. Done this way, the gloss and depth you approve on day one are the gloss and depth you keep.

Armourstone Coatings

Why Choose Armourstone Coatings for Your Metallic Floor

Metallic epoxy is as much a craft as a coating, so who lays it decides how it looks. Daler is the owner-operator and is on the tools for every job, so the person you speak to about the effect you want is the same person floating the pigments on the day - nothing is handed to a subcontractor. Armourstone is prep-first by principle, which means diamond grinding, moisture checks and crack repair happen before any resin is opened, not skipped to hit a price. Being based in Clyde North, the business covers Casey and Cardinia and out to Warragul and Gippsland, so it is a genuinely local outfit that turns up and stands behind the work. Daler works seven days a week, which for a showroom, retail space or office often means the floor can be poured after hours or over a weekend and be ready before you reopen. You get straight advice on whether metallic is the right call for your space and an honest fixed quote before anything starts. Call Armourstone Coatings on 0485 037 710 to talk it through.

TESTIMONIALS

What Our Metallic Epoxy Flooring Customers Say About Us

The Process

3 Step Process For Your Metallic Epoxy Flooring Needs

Free Quote

Send us your floor size and photos, or we visit and measure. You get a clear, fixed quote up front with no surprises.

Surface Prep

We diamond-grind the slab, repair cracks and oil damage, then prime it. Proper preparation is what stops epoxy peeling or lifting later.

Final Coat

We lay the base, broadcast the flake, and seal with a tough topcoat. Your floor is ready to drive on within days.

areas we serve

Metallic Epoxy Flooring

{{ custom_values.service_1 }} in {{custom_values.biz_area_1})

Clyde North

Armourstone Coatings is based right here in Clyde North, so this is the suburb we reach fastest and know best. Clyde North is one of Melbourne's fastest-growing corridors, with new estates like Meridian, Smiths Lane, Berwick Waters, Highgrove, Five Farms and Eliston handing over homes with bare, freshly poured double and triple-garage slabs every week. Those new slabs are exactly what epoxy is built for: they dust, stain and pick up hot-tyre marks the moment cars start using them, so coating them early protects the concrete long term. Owner Daler Dhanoa lives and works locally, diamond grinds every floor himself and never subcontracts, so Clyde North homeowners get an accountable local rather than a crew passing through. From garage flake finishes to driveway and path coatings, we cover the full range across every Clyde North estate. Call 0485 037 710 for a free fixed quote.

Beaconsfield

Beaconsfield blends established suburban streets with semi-rural blocks and acreage, and that mix shapes the epoxy work we do here. Many properties sit on larger parcels with big domestic sheds, detached workshops and multi-bay garages, so the floors are bigger and harder-working than a standard suburban garage. Sheds and workshops on these blocks cop machinery, hobby projects, oil and constant foot traffic, which is exactly where a ground-and-sealed epoxy floor earns its keep by staying sealed, dust-free and easy to sweep. Up in rural Beaconsfield Upper the sheds are bigger again. Armourstone Coatings, run by Clyde North owner-operator Daler Dhanoa, is a short drive away and diamond grinds every floor before any product goes down, whether it is a large shed slab or an upper-end home wanting a flake or metallic garage. Call 0485 037 710 for a free fixed quote.

Berwick

Berwick is unusual because it spans two very different housing types, and epoxy work here has to suit both. Around Berwick Village you find established brick homes with older garage slabs that carry years of wear, soaked-in oil staining and the occasional crack, while estates like Berwick Waters, Timbertop and Parkhill hand over fresh new-build slabs still waiting for their first coat. That mix means some Berwick floors need a repair-first approach while others simply need protecting early. Armourstone Coatings, run by Clyde North owner-operator Daler Dhanoa, handles both because every job starts with a proper assessment and a diamond grind rather than a one-size-fits-all coat. Whether your Berwick garage is decades old or freshly poured, we grind, repair where needed, then lay a hard-wearing flake or solid system. From garages and driveways to anti-slip and commercial floors, we cover the full range across Berwick. Call 0485 037 710 for a free fixed quote.

Cardinia

Cardinia is a rural shire locality of farms, large acreage blocks and hard-working sheds, so epoxy here is about function rather than a showroom garage. The typical Cardinia floor is a big machinery or implement-shed slab that lives with dust, mud, oil and heavy equipment day in, day out. Bare concrete on these blocks never stops generating dust and readily soaks up spills, which is why a ground-and-sealed or fully coated floor is such a practical upgrade. Armourstone Coatings, run by Clyde North owner-operator Daler Dhanoa, travels out to Cardinia's larger properties and coats these floors properly, diamond grinding first so the finish holds under machinery loads on rough, uneven slabs. From dust-controlling shed floors and grind-and-seal on big slabs to anti-slip coatings, we take on the practical rural jobs other coaters shy away from. Call 0485 037 710 for a free fixed quote.

Clyde

Clyde is the fast-growing new-estate neighbour right beside our Clyde North base, so it is one of the suburbs we reach quickest and know intimately. Like its neighbour, Clyde is filling with brand-new homes handing over bare double-garage slabs, but here we also see strong demand for alfresco flake finishes as families set up their outdoor entertaining areas. New slabs dust and pick up tyre marks quickly once cars move in, while alfresco concrete needs a UV-stable, non-slip finish that looks the part and shrugs off weather. Owner-operator Daler Dhanoa coats both properly, diamond grinding first and matching flake blends across your home. Being next door means fast response and easy follow-up if you want the garage now and the alfresco later. From garages and driveways to decorative flake and anti-slip, we cover Clyde in full. Call 0485 037 710 for a free fixed quote.

Cranbourne

Cranbourne is a large, well-established suburb where most garage slabs have years of use behind them, and that makes resurfacing and repair the heart of the work here. Unlike the new-estate corridors nearby, Cranbourne floors are typically older, often oil-stained, worn or cracked, and sometimes attached to light-commercial premises along the High Street strip as well as homes. Those tired slabs are exactly where a proper diamond grind, repair and recoat transforms a floor that looks past its best into a clean, sealed, hard-wearing surface. Armourstone Coatings, run by Clyde North owner-operator Daler Dhanoa, is a short drive from Cranbourne and specialises in reading an aged slab correctly before coating it, never rolling product over contamination. From resurfacing oil-stained garages and repairing cracks to light-commercial floors and anti-slip coatings, we cover the practical jobs Cranbourne's established homes and businesses need. Call 0485 037 710 for a free fixed quote.

Cranbourne West

Cranbourne West is a genuine two-sided suburb, and epoxy demand splits neatly down the middle. On one side sits the Cranbourne West industrial precinct off Thompsons Road and Evans Road, packed with warehouses, workshops and factory units where bare concrete cracks, dusts and stains under forklift and foot traffic. On the other are the newer residential estates around Sandhurst and Ranfurlie, where families want garage floors that stop lifting dust and shrug off hot tyres. Armourstone Coatings covers both from our Clyde North base, a short run down the freeway. We diamond grind every slab first, whether it is a 400 square metre warehouse floor or a single garage, then build the system up in layers so it holds under the load it will actually see. One local contact, no subcontractors, prep done properly.

Polyaspartic Floor Coating in Clyde North

Nar Nar Goon

Nar Nar Goon is a small rural township on the eastern edge of the Cardinia shire, and the floors here are nothing like a suburban garage. It is farms, hobby blocks and acreage, which means machinery sheds, implement sheds and hobby-farm workshops where the concrete copes with tractors, utes, dropped tools and everything a working property throws at it. Bare rural slabs shed a fine dust that gets into every tool and bench, while diesel, oil and fertiliser soak straight in and stain. Armourstone Coatings travels out to Nar Nar Goon from Clyde North to grind and coat these floors properly, whether it is a big machinery-shed slab wanting a tough grind-and-seal, a hobby-farm workshop after a full flake system, or the house garage on the block. We size the coating to the load the slab carries, and we do the prep that makes it last on a working property.

Polyurethane Floor Coating in Clyde North

Narre Warren

Narre Warren is one of the largest established suburbs in Melbourne's south east, anchored by the Fountain Gate retail and commercial hub off the Princes Highway, Overland Drive and Victor Crescent. That gives it a distinctive two-sided epoxy market. On one side sit the shops, showrooms, cafes, gyms and medical fit-outs around the Fountain Gate precinct, all needing floors that look sharp under lighting and stay safe underfoot. On the other sit thousands of established brick homes whose garage slabs have been dusting and staining for decades. Armourstone Coatings covers Narre Warren from nearby Clyde North, so response is quick either way. For the commercial side we lay hard-wearing, anti-slip floors that keep a business trading. For established garages we grind back the tired, oil-stained slab and finish with a flake system that makes a decades-old garage look new. Call 0485 037 710 for a free fixed quote.

Officer South

Officer South is one of the fastest-filling pockets of the Cardinia growth corridor, and it is largely a first-home and new-build suburb. Estates like Kaduna Park, Arena, Timbertop and the Bridgewood precinct are handing over house-and-land packages week after week, and nearly every one arrives with a bare double or triple garage slab and a fresh alfresco pad out the back. New concrete looks clean, but left uncoated it dusts, marks and lifts under hot tyres inside a season, and a green slab still holding moisture will blister a rushed coating. Armourstone Coatings covers Officer South from nearby Clyde North, a quick run up the corridor, and specialises in catching these floors early with a flake finish and a tough polyaspartic topcoat. Owner-operated by Daler Dhanoa, diamond-ground first, quoted up front. Call 0485 037 710 for a free quote.

Pakenham

Pakenham is the biggest centre at the eastern end of our core coverage, and it packs three epoxy markets into one town. First there is the Pakenham industrial and business park around Bald Hill Road and the Racecourse Road precinct, full of warehouses, factories and workshops where the floor is a working asset that carries forklifts, spills and traffic all day. Then there are the fast-growing estates on the Lakeside, Cardinia Lakes, Arena and Heritage Springs side, handing over bare garage slabs by the week. And there is a large stock of established homes off Main Street with older slabs due for resurfacing. Armourstone Coatings covers all three from Clyde North, and Pakenham marks the furthest-east point of our core area before Gippsland. We diamond grind every floor first, then build the right system: a high-build, anti-slip industrial floor for a factory, or a flake garage finish for a home.

Warragul

Warragul is a Gippsland regional town about 40 minutes east of our Clyde North base, and the clearest sign that Armourstone genuinely travels for the right job. It is a mixed market: established homes with older garage slabs, a growing commercial and main-street base around Queen Street and Smith Street, and surrounding rural properties with big machinery sheds and workshops. Locals often rely on the same handful of Gippsland operators, so a prep-first installer who actually drives out is worth having. Armourstone covers Warragul as part of our regional Gippsland reach, and the method does not change for the distance: we diamond grind every slab first, then build the right system, whether that is a flake garage floor, a grind-and-seal for a large rural shed, or a hard-wearing commercial floor. Owner-operated by Daler Dhanoa, nothing subcontracted, and quoted up front so travel never becomes a surprise on the invoice.

Metallic Epoxy Flooring In Clyde North

FREQUENTLY ASKED QUESTIONS

Everything you need to know about our Metallic Epoxy Flooring In Clyde North

How much does metallic epoxy flooring cost?

Metallic epoxy generally runs from around $90 to $160 per square metre because it is hand-worked and labour-intensive. The exact price depends on the area size, the condition of your concrete and how complex the effect is, since an old or stained slab needs more prep. Extras like coved skirting, extra coats or a bold multi-pigment design also move the figure. Armourstone gives you a free fixed quote after measuring the space, so you get a real number rather than a guess. Call 0485 037 710 to arrange it.

How long does it take, and when can I walk or drive on it?

Most metallic floors are laid over two to three days because grinding, priming, the metallic pour and the clear top-coat each need time and curing between them. You can usually walk on the floor around 24 hours after the final coat, with vehicle or heavy traffic best left a little longer while it fully cures. Curing times shift with temperature and humidity, so Daler gives you exact drive-on times for your job. Because Armourstone works seven days a week, the pour can often be scheduled after hours so a showroom or office is ready before you reopen. You will always be told the timeline up front.

Will a metallic epoxy floor peel, fade or yellow over time?

A metallic floor peels when it is laid over concrete that was not properly prepared, which is exactly what Armourstone guards against. Every slab is diamond ground to the right surface profile and moisture-checked before any resin goes down, so the system bonds mechanically rather than just sitting on top. The colour is sealed under a UV-stable clear top-coat, which is what resists yellowing and keeps the gloss from dulling in sunlight. Done this way the finish holds up to years of foot traffic, cleaning and everyday spills. Prep-first is the whole reason it lasts.

What is involved in getting a metallic floor installed?

It starts with a free on-site quote where Daler measures the area, checks the slab and talks through the effect and colours you want. On installation day the concrete is diamond ground, any cracks or moisture issues are dealt with, then a primer and pigmented base coat are applied. The metallic layer is poured and hand-worked wet to create the marble or lava effect, and once cured it is sealed with a clear UV-stable top-coat. You are given clear drying and drive-on times before the crew leaves, so you know exactly when the space is ready to use.